Different Types of Gates in Injection Molding: An Overview

Injection molding is a highly efficient manufacturing process used to produce complex plastic parts with high precision and repeatability. Elite Mold, a leading injection molding manufacturer, leverages advanced technologies and expert know-how to deliver superior mold designs and products. One critical aspect of injection molding is the design of gates, which play a vital role in the quality and efficiency of the molded parts. This article provides a comprehensive overview of different types of gates used in injection molding.

Understanding Injection Molding Gates

Injection molding gates are the entry points through which molten plastic flows into the mold cavity. The design and type of gate significantly impact the quality, appearance, and structural integrity of the final product. Proper gate selection is essential for achieving optimal flow, reducing defects, and ensuring cost-effective production.

Types of Gates in Injection Molding

1. Edge Gate

Overview

Edge gates, also known as side gates, are positioned along the edge of the mold cavity. This type is one of the most common and simplest gate designs, suitable for a wide range of part geometries.

Advantages

  • Easy to Manufacture: Simple design and machining make edge gates cost-effective.
  • Versatility: Suitable for various shapes and sizes, offering flexibility in design.

Applications

Edge gates are often used for larger parts where gate marks are acceptable on non-critical surfaces.

2. Submarine Gate

Overview

Submarine gates, or tunnel gates, are located below the parting line and enter the mold cavity at an angle. The gate is automatically trimmed during the ejection process.

Advantages

  • Automatic Trimming: Reduces post-processing labor and time.
  • Aesthetic Improvement: Leaves minimal gate marks, enhancing the part’s appearance.

Applications

Ideal for parts requiring high aesthetic standards, such as consumer electronics and automotive components.

3. Fan Gate

Overview

Fan gates are designed with a wider entry point that gradually narrows as it enters the mold cavity, promoting even flow distribution.

Advantages

  • Uniform Flow: Ensures consistent material distribution, reducing the risk of warpage and sink marks.
  • Improved Mechanical Properties: Enhances the structural integrity of the molded part.

Applications

Commonly used in large, thin-walled parts where uniform material flow is crucial.

4. Pin Gate

Overview

Pin gates are small, round gates typically used in hot runner systems. They provide precise control over material flow and are usually employed in multi-cavity molds.

Advantages

  • Precision: Allows for accurate control of flow rates and minimizes gate vestige.
  • Efficiency: Suitable for high-volume production, enhancing manufacturing efficiency.

Applications

Widely used in the production of small, intricate parts like medical devices and electronic components.

5. Diaphragm Gate

Overview

Diaphragm gates are circular gates used primarily for cylindrical or round parts. They ensure symmetrical filling of the mold cavity.

Advantages

  • Symmetrical Flow: Promotes even material distribution, reducing internal stresses.
  • Minimal Defects: Lowers the risk of voids and weld lines, improving part quality.

Applications

Typically employed in manufacturing parts such as bottles, containers, and other hollow cylindrical items.

6. Cashew Gate

Overview

Cashew gates, also known as banana gates, have a curved design that allows them to be used in tight or confined mold spaces. They are self-trimming and often used for complex geometries.

Advantages

  • Space-Efficient: Suitable for parts with restricted gating areas.
  • Automatic Trimming: Simplifies the molding process and reduces post-mold finishing.

Applications

Ideal for intricate and complex part designs requiring precise gating solutions.

Conclusion

Selecting the right type of gate is crucial for optimizing the injection molding process. Elite Mold, as a top injection molding manufacturer, combines extensive R&D, innovative design, and advanced manufacturing techniques to provide high-quality mold solutions. Whether you’re looking for OEM/ODM services or custom mold design, understanding the various types of gates and their applications can significantly enhance your product’s performance and aesthetics.

For businesses seeking reliable injection molding solutions in China, Elite Mold offers unparalleled cost performance and a comprehensive range of services from design to supply. Partner with Elite Mold and experience the advantage of working with a leading industry expert.

Injection Molds

Plastic injection molds from Elite are used in many fields, such as the automotive industry, medical devices, electronics, etc. As a plastic injection mold manufacturer we provide plastic injection molding service to our customer, believes that the key factors for high-quality injection mold are good mold design, skilled tool technicians, and precise machines. These factors together make the custom plastic molds precise and meet your requirements.

Plastic Molded Part

With exquisite technology, advanced facilities, and actively absorbing the quintessence experiences from plastic molding manufacturers, Elite mold is a injection molding manufacturer, has developed a professional team for custom plastic injection molded parts developing and manufacturing. Moreover, we owns a CNC machining center and wire- cutting machine, which can guarantee the quality of custom plastic molding.

Back
whatsapp
WeChat
Message
en_USEnglish